中文 / EN

中文
EN
Wind Power
Wind Power
Shenzhen Qianhai IntelliUnion Technology Development Co., Ltd. Home > Industry Solutions > Wind Power

Industry Solutions

Wind Power
Nuclear Power
Metallurgy
Thermal Power
Coal Mining
Petrochemicals
As an important part of clean energy, the wind power industry depends on stable and safe equipment operation for generation efficiency and O&M costs. Oil serves as the lubricant and cooling medium for key drivetrain components, such as gearboxes and bearings.
Oil Monitoring System
Learn More
The system uses non-contact laser displacement sensors for high-precision, all-weather online monitoring of wind turbine main shafts. Based on laser triangulation, it acquires main-shaft end-face position signals in real time for signal processing, edge computing and intelligent analysis.
Main Shaft Displacement Monitoring System
Learn More
The blade clearance radar monitoring system uses IMon-B300 for clearance monitoring. When blade clearance approaches the specified minimum, the turbine's main controller can immediately take protective measures such as reducing speed or feathering the blades.
Blade Clearance Radar Monitoring System
Learn More
Developed for wind turbine applications, this online insulation monitoring device uses DC injection to measure insulation in cables or motor windings. The instrument is interlocked with the wind turbine circuit.
Motor Insulation Monitoring System
Learn More
Wind turbine flange gap monitoring uses gap sensors installed on two flange faces to capture minute changes in their separation in real time. When the gap exceeds the allowable value, an alarm promptly notifies relevant personnel to inspect the site.
Flange Gap Monitoring System
Learn More
Wind turbines are expensive and operate in harsh environments under complex conditions. Prolonged combined vibration, torsion, shear and other loads can damage components and their connecting fasteners to varying degrees.
Bolt Monitoring System
Learn More
Dedicated sensors provide comprehensive blade condition monitoring. The system detects blade ice thickness in real time and intelligently guides turbine start/stop decisions, helping prevent mechanical impacts and unbalanced dynamic loads caused by ice shedding.
Blade Monitoring System
Learn More
The drivetrain monitoring system collects real-time data from key rotating components, including the main shaft and bearings, gearbox, generator and coupling, and analyzes the signals to assess equipment health.
Drivetrain Monitoring System
Learn More
Modern large wind turbines have hub heights exceeding 80 m. Tower quality defects and uneven foundation settlement can cause tower tilt and nacelle/blade displacement. Severe cases may lead to tower cracking, loose foundation rings or even tower collapse.
Tower Safety and Settlement Monitoring System
Learn More
Based on the ISen-H231 eddy-current displacement sensor, the gearbox high-speed shaft axial movement monitoring system is an online solution for high-speed gearbox shafts in wind power applications, offering high precision of 1 μm.
Gearbox High-Speed Shaft Axial Movement Monitoring System
Learn More
Generator displacement caused by improper installation, misalignment, or loose or broken fastening bolts seriously affects normal turbine operation, increases vibration and can cause failures in generator bearings, gearbox high-speed shaft bearings and other components.
Generator Displacement Monitoring System
Learn More
Lightning strikes are particularly frequent at wind turbine blades, especially their tips. The combined mechanical impact and thermal energy released instantaneously by lightning current can cause localized carbonization, trailing-edge cracking or even blade puncture.
Blade Lightning Current Monitoring System
Learn More
The pitch system adjusts blade pitch according to wind speed and direction and tracks wind direction to maintain stable turbine power output. Under these operating conditions, pitch bearings must withstand large overturning moments and impact loads from variable winds.
Pitch Bearing Monitoring System
Learn More
Contact us for professional solutions
Consult now

Service Hotline： 400-8558-612

Tel： 0755-2322 3880

Email： mail@intelliunion.com

Address： 2nd Floor, Building C, Phase II, Huafeng International Robot Industrial Park, Hangcheng Avenue, Xixiang Subdistrict, Bao'an District, Shenzhen

About Us
Company Profile
Milestones
Corporate Culture
Honors and Certifications
Our Clients
Products & Solutions
Industry Solutions
Product Center
Customer Cases
Wind Power Cases
Coal Mining Cases
Chemical Industry Cases
Nuclear Power Cases
Thermal Power Cases
Service and Support
Customer Service
News
Company News
Exhibition Information
Contact Us
Join Us
Contact Details
Online Message
Copyright © Shenzhen Qianhai IntelliUnion Technology Development Co., Ltd. All rights reserved. Privacy Policy Legal Notice